• 800.878.8181

  • info@nhyates.com

Burkay Genesis Circulating Water Heater from A.O. Smith

Burkay Genesis Circulating Water Heater

Burkay Genesis Circulating Water Heater from A.O. Smith

The people at A.O. Smith design hot water heaters that highlight the company’s innovative ideas, efficient output, and reliable performance. The Burkay Genesis Circulating Water Heater high-efficiency boilers are no exception. The Burkay Genesis was designed for indoor use installations that require an output over 400,00 BTUs and can accommodate up to 2.07 million BTUs depending on your building’s needs. In addition, the Burkay Genesis Circulating Water Heater features an 84% thermal efficiency which is the absolute highest efficiency possible in a non-condensing water heater. The unit’s Low NOx provides precise amounts of gas and air mixture premixed through special orifices and is forced through stainless steel burners that provide a complete and clean combustion. GW/GWO 1000 through 1850 comply with SCAQMD Rule 1146.2 and other Air Quality Management with similar requirements. GW/GWO 2100 and 2500 comply with SCAQMD Rule 1146.1 when field certified by SCAQMD.

Burkay Genesis Circulating Water Heater

 

Electronic Control with Precise Temperature Management
  • Controls every electrical water heater function, including pump operation and main burner ignition, delivers precise temperature management, with ±1o accuracy
  • Display panel shows the current operating status and fault readings n Display also shows temperature setpoints, outlet temperature, current inlet/outlet differential, and tank temperature
  • Included remote temperature sensor when mounted in the storage tank allows the tank temperature to be set and monitored at the water heater

 

Stage Gas Firing System
  • Prevents short cycling and ensures smooth operation, saves fuel and extends product life
  • Delivers maximum output when demand is high, reduced firing rates during off-peak times.

 

Ultra-Low-NOx Operation
  • Complies with SCAQMD Rule 1146.2 and other Air Quality Management Districts with similar NOx emission requires of 14 ng/J or 20 ppm (GW/GWO 1000-1850 models)

 

Copper Finned-Tube Heat Exchanger
  • Gasketless glass-lined headers and copper-finned tubes with extruded integral fins deliver exceptional heat transfer
  • Copper is lightweight for easier handling and immune to thermal shock

 

Space Saving Design
  • Optional stack rack allows one unit to be stacked on top of another, doubling output within the footprint of a single unit
  • If floor space is limited, the Genesis water heater can be installed outdoors with an optional outdoor Vent Cap.
  • Multiple Venting Options
  • All Genesis models can vent vertically in Category I with double wall “B” vent or horizontally in Category IV with AL29-4C stainless steel vent material.

 

Factory Start-Up Included
  • Required for activating warranty and assuring maximum operating performance. Contact your local sales representative or Authorized Start-Up Agent to arrange a FREE Certified Start-Up.

 

Five-Year Heat Exchanger Limited Warranty 
Meets ASHRAE/IESNA 90.1-2004

At N.H. Yates, we know water. If you are a contractor or engineer that needs more information on the Burkay Genesis Circulating Water Heater from A.O. 
Smith contact a water professional at Yates today.

A.O. Smith Commercial Tankless Rack System

A.O. Smith Commercial Tankless Rack System

The A.O. Smith Commercial Tankless Rack System from N.H. Yates

A.O. Smith is known throughout the world for manufacturing state-of-the-art commercial water heating solutions. However, their new A.O. Smith Commercial Tankless Rack System just might be the most versatile commercial tankless system yet. With a wide variety of framework configurations and the ability to link as many as 20, high-efficiency, 199,000 BTU condensing tankless heaters, commercial contractors are offered a variety of installation options. In fact, A single A.O. Smith Commercial Tankless Rack System is capable of delivering up to 1,592,000 BTUs and can be configured to pair with a hot water storage tank which provides flexibility for a variety of applications. This line of commercial tankless tack systems come in three types – wall mount, free standing back-to-back, and free standing in-line.

A.O. Smith Commercial Tankless Rack System – Wall Mount

A.O. Smith Commercial Tankless Rack System

The wall mounts configuration allows for up to 20 heaters link together which are capable of delivering up to 597,000 BTUs.

Lightweight

  • Constructed of anodized aluminum frame
  • Utilizes the industry’s lightest 199,000 BTU high efficiency condensing tankless heater

Expandable

  • Multiple designs and installation configurations
  • Up to 597,000 BTUs from a single rack system
  • Able to link up to 20 heaters together with multi-link system

Redundancy

  • Multiple Combustion systems provide peace of mind
  • Easily isolate a unit for maintenance to extend the life of the heaters

Easy Field Installation

  • Reduce installation costs with three simple connections (cold water, hot water, and gas)

Easily Integrate Storage

  • As the world’s largest manufacturer, A.O. Smith can easily integrate storage into any design.

Warranty

  • Six year limited heat exchanger
  • Five year limited tankless parts
  • One year limited rack parts

 

A.O. Smith Commercial Tankless Rack System – Free Standing Back-to-Back

A.O. Smith Commercial Tankless Rack System

These Free Standing Back-to-Back designs are available in 2, 3, 4, 5, and 6 unit configurations and can deliver up to 1,194,000 BTUs from a single rack system.

Lightweight

  • Constructed of anodized aluminum frame
  • Utilizes the industry’s lightest 199,000 BTU high efficiency condensing tankless heater

Expandable

  • Multiple design and installation configurations
  • Up to 1,194,000 BTU on a single rack system
  • Able to link up to 20 heaters together with multi-link system

Redundancy

  • Multiple Combustion systems provide peace of mind
  • Easily isolate a unit for maintenance to extend the life of the heaters

Easy Field Installation

  • Reduce installation costs with three simple connections (cold water, hot water, and gas)

Easily Integrate Storage

  • As the world’s largest manufacturer, A.O. Smith can easily integrate storage into any design.

Warranty

  • Six year limited heat exchanger
  • Five year limited tankless parts
  • One year limited rack parts

 

A.O. Smith Commercial Tankless Rack System – Free Standing In Line

The Free Standing In-Line design allows you to link up to 20 heaters together with multi-link system and deliver up to 597,000 BTU from a single rack system.

Lightweight

  • Constructed of anodized aluminum frame
  • Utilizes the industry’s lightest 199,000 BTU high efficiency condensing tankless heater

Expandable

  • Multiple design and installation configurations
  • Up to 1,194,000 BTU on a single rack system
  • Able to link up to 20 heaters together with multi-link system

Redundancy

  • Multiple Combustion systems provide peace of mind
  • Easily isolate a unit for maintenance to extend the life of the heaters

Easy Field Installation

  • Reduce installation costs with three simple connections (cold water, hot water, and gas)

Easily Integrate Storage

  • As the world’s largest manufacturer, A.O. Smith can easily integrate storage into any design.

Warranty

  • Six year limited heat exchanger
  • Five year limited tankless parts
  • One year limited rack parts

At N.H. Yates, we know water. If you are a contractor or engineer interested in more information about the A.O. Smith Commercial Tankless Rack System contact a water professional at N.H. Yates today.

 

Commercial High-Purity Water Systems

Commercial High-Purity Water Systems from N.H. Yates 

At N.H. Yates, we are proud to be a manufacturer’s for all of the fine products that Water Control Corp. offers. However, in this article, we are going to talk specifically about Water Control Corp.’s Commercial High-Purity Water Systems. As many of our satisfied customers are aware, Water Control Corp. has over 45 years of experience working with specialty water systems and therefore understand exactly what it takes to build your system and keep it running. From the initial water testing to 3D design, spec-writing and on-site commissioning, the experienced technicians at Water Control Corp. have what it takes to ensure that every detail of your product is addressed. These systems are high-purity water made simple!

All Commercial High-Purity Water Systems Include:
  • Pre-Treatment:
    • Temperature regulation
    • Backflow prevention
    • Softening
    • Chemical feed
    • Chlorine removal
    • TOC reduction
  • Production: 
    • 100-200,000 GPD systems
    • Nanofiltration and De-Sal options
    • Concentrate recycle
    • Low energy and high output membrane options
    • DI polishing
  • Storage:
    • 20-10,000 gallon tanks
    • Hydropneumatic tank options
    • Standard and core-bottom
    • Air filtration
    • HDPE and Polypropylene
  • Delivery:
    • Variable speed and DOL pumps
    • Loop pressure controls
    • UV treatment
    • Sub-micron filtration
    • Redundant pump options
  • Controls:
    • Standard and PLC/touchscreen panels
    • NEMA options
    • Single point electrical conncections
    • BAS system integration

Water Control Corp. can build a packaged, turnkey solution to virtually any water treatment issue. This includes softening, filtration, high-purity water RO/DI, commercial rainwater harvesting systems, and more. N.H. Yates and the people at Water Control Corp.’s team of in-house professionals are here to support you through the entire process, from conception or commissioning, to service and every day maintenace

At N.H. Yates, we know water. If you are a contractor or engineer interested in more information about Water Control Corp.’s Commercial High-Purity Water Systems contact a water professional at Yates today!