• 800.878.8181

  • info@nhyates.com

Tag: hvac

Flexcon Industries Expansion Tanks

Posted on by Dan Kelbaugh

Flexcon Industries Expansion Tanks from N.H. Yates

Water heaters can stress the pipes of a plumbing system during the normal thermal expansion that occurs during the heating process. Therefore, many engineers choose to install expansion tanks, sometimes called thermal expansion tanks, as a safety to minimize the risk of pressure damage to the plumbing system. It’s estimated that 50 gallons of cold water in a standard water heater can expand to take up the space of 52 gallons when heated to 120F. This extra water can create excess pressure in the plumbing system which over time can cause damage to the water heater, plumbing fixtures, and the water pipes themselves. At N.H. Yates, we are proud to be manufacturers representatives for the entire line of Flexcon Industries Expansion Tanks and have seen their product successfully utilized in many commercial and residential applications. 

Flexcon Industries Expansion Tanks FLEX Pro 2 PH Series

The FLEX 2 Pro PH expansion tank from Flexcon Industries gives your system the ultimate in hot water pressure protection. This unit features Flexcon’s exclusive CAD-2 diaphragm and antimicrobial liner and is designed to maintain safe pressure in water systems that use a backflow preventer.

  • 16 – gauge solid steel tank, finished with highest quality urethane paint to
  • stand up to the dampest basement or crawl space
  • CAD-2 diaphragm technology which is strong, 100% butyl diaphragm and copolymer polypropylene lower chamber for maximum water and air separation.
  • Stainless steel nipples designed to stand up to the harshest elements

Flexcon Industries Expansion Tanks HXT and SXHT Series

The Flex Pro 2 HTX and SXHT series are designed to relieve pressure build-up in forced hot water heating systems. Both of these tanks lines’ diaphragms are oversized which maximizes drawdown and minimizes wear. In addition, both models include tank, air scoop, and vent for added installer convenience. Hydronic accessory items including a fill valve are also available for the HXT and SXHT models. 

  • 16 – gauge solid steel tank, finished with highest quality urethane paint to
  • stand up to the dampest basement or crawl space
  • CAD-2 diaphragm technology which is strong, 100% butyl diaphragm and copolymer polypropylene lower chamber for maximum water and air separation
  • Condensation-reducing design virtually eliminates external corrosion
  • Copolymer polypropylene base is engineered to withstand maximum loads and extreme environmental conditions

At N.H. Yates, we know water. If you are a contractor or engineer in need or more information on Flexcon Industries Expansion Tanks contact a water professional at N.H. Yates today.

Red-White Valve Corp Digital Differential Pressure Manometer

Posted on by Dan Kelbaugh

Digital Differential Pressure Manometer

Red-White Valve Corp Digital Differential Pressure Manometer

Digital Pressure Manometers are portable devices that can be used to indicate the difference between two pressures in a system. However, manometers can also be used to determine a single pressure as well. Red-White Vale Corp’s Digital Differential Pressure Manometers are versatile, handheld, battery operated, and useful for a variety of applications.

Red-White Valve Corp T550RWV Digital Differential Pressure Manometer
    • Memory capacity up to 20,000 records
    • Anti-freeze media correction Working with projects
    • Project measuring with the possibility of printed balancing report
    • Li-ion rechargeable battery with USB charger Mini USB PC interface
    • Ergonomic device case QVGA
    • RGB 2.2 inch, 240 x 320 pixel backlight display
    • Memory capacity up to 1,200 valves Simple valve detection by valve image
    • Programmable recording of measured values
  • IP65 cover

The T550RWV Digital Differential Pressure Manometer takes advantage of an integrated pressure differential sensor that gives an exact measurement of the static pressures while also displaying the real-time GPM of your hydronic system. In addition, the flow of your hydronic system is calculated from the preprogrammed characteristics of the manometer’s balancing valves. Of course, the valve characteristics can also be manually selected.

Digital Differential Pressure Manometer

How to Use the T550RWV Digital Differential Pressure Monitor:
  1. Connect the hoses to the valve (No air should be in the hoses for accurate measurement)
  2. Turn on the unit and press 0 button, and follow the 3-step procedure shown on the display (You will be instructed to connect the two hoses to T550 during this procedure.) In case the device needs to be reset to zero, disconnect the unit from the hoses and repeat Step 2.
  3. Press VALVE button, select RWV from the list of valve manufacturers and press OK button. Select the valve model and size, and press OK button again. A picture of the valve model selected will be shown on the display for confirmation. * In addition, for Variable Orifice valves, press PRESET button, input the current valve setting shown on the valve hand-wheel, and press OK button.
  4. The unit will display the flow rate and the differential pressure.

At N.H. Yates, we know water. If you are a contractor, engineer, or maintenance staff interested in more information about Red-White Valve Corp’s Digital Differential Pressure Manometer contact a water professional at Yates today. 

Burkay Genesis Circulating Water Heater from A.O. Smith

Posted on by Dan Kelbaugh

Burkay Genesis Circulating Water Heater

Burkay Genesis Circulating Water Heater from A.O. Smith

The people at A.O. Smith design hot water heaters that highlight the company’s innovative ideas, efficient output, and reliable performance. The Burkay Genesis Circulating Water Heater high-efficiency boilers are no exception. The Burkay Genesis was designed for indoor use installations that require an output over 400,00 BTUs and can accommodate up to 2.07 million BTUs depending on your building’s needs. In addition, the Burkay Genesis Circulating Water Heater features an 84% thermal efficiency which is the absolute highest efficiency possible in a non-condensing water heater. The unit’s Low NOx provides precise amounts of gas and air mixture premixed through special orifices and is forced through stainless steel burners that provide a complete and clean combustion. GW/GWO 1000 through 1850 comply with SCAQMD Rule 1146.2 and other Air Quality Management with similar requirements. GW/GWO 2100 and 2500 comply with SCAQMD Rule 1146.1 when field certified by SCAQMD.

Burkay Genesis Circulating Water Heater

 

Electronic Control with Precise Temperature Management
  • Controls every electrical water heater function, including pump operation and main burner ignition, delivers precise temperature management, with ±1o accuracy
  • Display panel shows the current operating status and fault readings n Display also shows temperature setpoints, outlet temperature, current inlet/outlet differential, and tank temperature
  • Included remote temperature sensor when mounted in the storage tank allows the tank temperature to be set and monitored at the water heater

 

Stage Gas Firing System
  • Prevents short cycling and ensures smooth operation, saves fuel and extends product life
  • Delivers maximum output when demand is high, reduced firing rates during off-peak times.

 

Ultra-Low-NOx Operation
  • Complies with SCAQMD Rule 1146.2 and other Air Quality Management Districts with similar NOx emission requires of 14 ng/J or 20 ppm (GW/GWO 1000-1850 models)

 

Copper Finned-Tube Heat Exchanger
  • Gasketless glass-lined headers and copper-finned tubes with extruded integral fins deliver exceptional heat transfer
  • Copper is lightweight for easier handling and immune to thermal shock

 

Space Saving Design
  • Optional stack rack allows one unit to be stacked on top of another, doubling output within the footprint of a single unit
  • If floor space is limited, the Genesis water heater can be installed outdoors with an optional outdoor Vent Cap.
  • Multiple Venting Options
  • All Genesis models can vent vertically in Category I with double wall “B” vent or horizontally in Category IV with AL29-4C stainless steel vent material.

 

Factory Start-Up Included
  • Required for activating warranty and assuring maximum operating performance. Contact your local sales representative or Authorized Start-Up Agent to arrange a FREE Certified Start-Up.

 

Five-Year Heat Exchanger Limited Warranty 
Meets ASHRAE/IESNA 90.1-2004

At N.H. Yates, we know water. If you are a contractor or engineer that needs more information on the Burkay Genesis Circulating Water Heater from A.O. 
Smith contact a water professional at Yates today.

Skidmore X-Pot XP

Posted on by Dan Kelbaugh

skidmore X-pot XP

Get the Skidmore X-Pot XP from N.H. Yates

Rather you realize it or not, suspended or deposited solids in the water of your HVAC or process systems can cause abrasion, enhance corrosion, and reduce temperature transfer. In addition, these particles can prevent inhibitors from reaching metal surfaces, remove inhibitors and/or the protective film from metal surfaces and, they can even promote the formation of a biofilm or other corrosive deposits. To avoid this from occurring it’s important to install a filtration system that can remove these chemicals from the water while injecting it with chemicals to preserve the systems. For large commercial buildings, the Skidmore X-Pot XP is an excellent choice to keep your system free from these harmful and abrasive agents.

The Skidmore X-Pot XP is setting a new industry standard for slipstream filtration solutions. The engineers at Skidmore designed the XP’s for large commercial heating and cooling water systems up to 79,886 gallons in volume. In fact, the Skidmore X-Pot XP not only has amazing pulling power with its 13 rare earth magnets but also a large capacity filter bag to capture non-magnetic materials and will filter down to 1.0µ. Almost nothing can escape the XP.

Skidmore X-Pot XP Specifications

The XP’s product design requires minimal maintenance and allows for simple filter replacement.

skidmore X-Pot XP

  • All stainless steel construction including all 2 in valves and fittings. (Except 3/4 inch AAV)
  • Dosing capacity of 6.6 gallons
  • Factory Test Pressure – 360 PSI
  • Max Working Pressure – 232 PSI
  • Flow Rate up to 55.4/gallons
  • Maximum System Volume – 79,886 gallons
  • Temperature Range 32º F to 200º F
  • Weight Empty – 100lbs
  • Weight Full – 188lbs
  • 2 SS Magnet Grates Containing 13 Rare Earth Magnets
  • 1 SS Baffle Plate
  • Compatible with 100, 50, 25, 5, and 1µ
  • Floor Standing

At N.H. Yates, we know water. If you are an engineer or contractor in need of more information about the Skidmore X-Pot XP contact a water professional at N.H. Yates today.

Skidmore X-Pot 6

Posted on by Dan Kelbaugh

dunkirk x-pot 6

The Skidmore X-Pot 6 from N.H. Yates

Rather you realize it or not, suspended or deposited solids in the water of your HVAC or process systems can cause abrasion, enhance corrosion, and reduce temperature transfer. In addition, these particles can prevent inhibitors from reaching metal surfaces, remove inhibitors and/or the protective film from metal surfaces and, they can even promote the formation of a biofilm or other corrosive deposits. To avoid this from occurring it’s important to install a filtration system that can remove these chemicals from the water while injecting it with chemicals to preserve the systems. The Skidmore X- Pot 6 is an all in one slipstream filter, magnetic filter, air separator, and shot-feeder that can improve the efficiency of your system by improving the quality of your water.

The X-Pot 6 contains rare earth magnets that are which are encased within a stainless steel magnet grate that allows for easy removal and cleaning. In addition to the magnets, the X-Pot 6’s cartridge filter provides superior cleaning and exceptional retention of system debris. Last, but not least, the unit also includes excellent air and micro-bubble removal via the onboard AAV which makes it beneficial for all systems.

Skidmore X-Pot 6 Specifications

dunkirk x-pot 6

  • Stainless steel construction including all 1″ valves and fittings (1/2″ AAV).
  • Dosing capacity of 2.6 gallons
  • Factory Test Pressure of 225 PSI with a Maximum Working Pressure of 150 PSI.
  • Flow Rate up 15.8 gallons/minute (with clean filters).
  • Maximum system volume of 22,824
  • Temperature Range 32˚F to 200˚F
  • Weight Empty – 47lba
  • Weight Full – 75lbs
  • 1 SS Grate Magnet containing 6 rare earth magnets
  • 1 SS Baffle Plate
  • Compatible with 100, 50, 20, 5, and 0.5 cartridge filters.
  • Wall mounted.
  • Manufactured and tested in accordance with PED 2014/68/EU.

At N.H. Yates, we know water. If you are a contractor or engineer in need of more information of the Skidmore X-Pot 6 contact a water professional at Yates today.

Taco LoadMatch System

Posted on by Dan Kelbaugh

Taco LoadMatch

Get the Taco LoadMatch System from N.H. Yates

The Taco LoadMatch is a hydronic system that is more energy efficient and produces less waste than traditional air-cooled HVAC systems. The LoadMatch is a more energy efficient system because it uses water, which has a higher specific gravity than air. This means the hydronic LoadMatch system only requires about half the energy of a comparable air-cooled system to move the same amount of BTUs around a building. The Taco LoadMatch System also uses a much simpler design than most air systems. Rather than a complicated system of pipe fittings, insulation, control valves, and balancing valves, Taco’s LoadMatch System utilizes a single pipe design to cool even very large, industrial buildings.

The Taco LoadMatch Concept

Taco LoadMatch

The LoadMatch hydronic system is a combination of two old concepts merged with a new technology. The two old concepts are single pipe distribution and primary-secondary pumping. A primary distribution system is a single loop, while the secondary distribution system is a decoupled secondary piping loop for each terminal unit in the system. The new technology comes in the form of Taco’s maintenance-free wet rotor circulators which provide a specified flow to each terminal unit in the system loop at all times.

Key Component of the LoadMatch System

The Taco LoadMatch  has several unique components that make up this efficient hydronic system:

Taco LoadMatch Circulators

Taco LoadMatch

The LoadMatch Series Circulators were designed for quiet and efficient operation. This unit’s patented design is easily serviceable without removing the entire unit from the piping system. In fact, all LoadMatch Circulators use a unique “00” replaceable cartridge which contains all of the moving parts so you can easily repair the unit without losing functionality.

Taco LoadMatch Thermostats

 

Taco LoadMatch Thermostats give users exceptional control of the heat pump of fan coil of your LoadMatch system. The all-in-one control can be preprogrammed to suit individual LoadMatch applications with little, or, no additional configuration necessary. In addition, there are LoadMatch Thermostats compatible with BACnet, Echelon-Lontalk while non-communicating versions can be used with virtually any system.

Taco LoadMatch Twin-Tee Fittings

Taco LoadMatch

Taco’s patented LoadMatch Twin-Tee fitting assures the comfort and performance of its single pipe hydronic system and primary secondary two-pipe hydronic system. The Twin-Tee was designed to replace the two primary circuit tees used to connect a secondary piping circuit to a primary piping circuit in a hydronic system. In addition, the Twin-Tee ensures that the secondary piping circuit is decoupled, so the flow of the secondary circuit, when the secondary pump is off and the primary pump is on, is zero. It also ensures the flow in other circuits is not affected by the operation of the secondary circuit pump.

At N.H. Yates, we know water. If you are a contractor or engineer interested in more information on the Taco LoadMatch System contact a water professional at Yates today!

 

 

 

Maxitrol Ball Valves

Posted on by Dan Kelbaugh

maxitrol ball valves

Maxitrol Ball Valves from N.H. Yates

Ball valves guide, direct, and modulate the flow of various types of liquids by way of an opening which has a small opening in the middle called a port. By turning the handle on the ball valve, the port manually opens and closes to control the pressure of the liquid. Plumbing and HVAC contractors use ball valves to control the flow of many substances including water, oil, steam, and gas on a variety of applications. At N.H. Yates we are proud to be a manufactures representative for the entire line of Maxitrol Ball Valves which feature their innovative hollow ball and seat design. The research and development team at Maxitrol put years of work and testing into their ball valves to manufacture the hollow ball with a technical level not found in other products.

Maxitrol Ball Valves Models BV602 & BV250

The BV602 and BV250 Ball Valves from Maxitrol have a strong body of forged brass, female NPT inlet and outlet, hard chrome plated ball, and anticorrosion Dactomet treated handle. The BV602 contains seats of Buna N, and are of one-piece construction. Whereas the BV250 model contains PTFE and is made of two-piece construction. Both Maxitrol Ball Valves are equipped with a self-locking nut that improves reliability between the stem and lever by providing additional stability from vibrations. In addition, to the seal created by the O-ring, a PTFE anti-thrust washer seals against the shoulder of the valve. Maxitrol manufactures both models of ball valves with a unique new seat shape to reduce friction during opening and closing. This seat shape reduces torque on the entire unit by 20% to 40% which increases the life of the ball valve.

At N.H. Yates, we know water. If you are interested in more information on Maxitrol Ball Valves contact one of the water professionals at Yates today!

Flex-Hose Flexcomp Expansion Compensators

Posted on by Dan Kelbaugh

Flexcomp Expansion Compensators

 

Flex-Hose Flexcomp Expansion Compensators

At N.H. Yates, we proudly represent the complete line of Flex-Hose Expansion Compensators including the innovative Flexcomp Expansion Compensator. The people at Flex-Hose engineer and manufacture the Flexcomp for a broad range of requirements including some of the most demanding applications in the world. Flexcomp Expansion Compensators are designed to absorb thermal growth in HVAC small diameter piping systems. In most cases, these expansion compensators eliminate the need for expensive pipe loops and the associated maintenance associated with packed slip joints. In addition, Flex-Hose fabricates the Flexcomp from stainless steel and is available with copper tube ends, steel male NPT ends, or 150 lb steel flanges. The Flexcomp is available for pipe ranging from 3/4 inch to 4 inches in diameter and pressure rating up to 175 PSI.

Why Choose Flexcomp Expansion Compensators?

Flexcomp Expansion Compensators

First, Flex-Hose understands that no contractors requirements will be exactly the same and therefore design the Flexcomp to work with a wide variety of applications. Second, the Flexcomp Expansion Compensator’s compact design allows contractors to save valuable space when installing HVAC systems. The Flexcomp is able to absorb up to 2 inches of axial movement resulting from thermal growth in domestic hot water, heating hot water, and chilled piping systems. Third, the Flexcomp is durable. The entire unit is externally pressurized and made of rugged stainless steel bellows to assure safety and reliability. Finally, the Flexcomp is an energy efficient choice. The unit’s liner design prevents bellows impingement or fatigue due to flow reduced vibration. The standard working pressure ratings are sufficient for up to 200 psi with a maximum system test pressure of 300 psi.

Flexcomp Expansion Compensators

 

At N.H. Yates, we know water. If you are a contractor in need of more information on Flex-Hose Flexcomp Expansion Compensators or any other Flex-Hose product, contact a water professional at Yates today!

 

 

Maxitrol EXA Star Modulating Valves

Posted on by Dan Kelbaugh

EXA Star Modulating Valves

Maxitrol EXA Star Modulating Valves

Modulating control valves change the flow of fluids, pressure, level, and temperature control of a system. Most modulative values are made up of three main parts: a valve body, an actuator, and a positioner. The positioner, through the actuator, drives the valve based the setting of the control signal. The Maxitrol EXA Star Modulating Valves are equipt with a built-in digital controller that gives a seamless interface with a process controller. The valve has two buttons and a communication LED for the user interface which is used to set the valve for high and low fire settings. In addition, the valve has full open and full close mechanical limits. This feature adds dimension for sizing and applying is significant because it allows the valve to be set up for an entirely different net output depending on pressure supply. The EXA Star Modulating Valve has six electronic connections – two for the power, two for the control signal, and two for the position feedback.

Linear Maxitrol EXA Star Modulating Valves

EXA Star Modulating Valves

Maxitrol’s E42, E52, and E62 Series EXA Star Modulating Valves are designed to have a linear relationship between the control signal and flow rate. This flow rate linearization will optimize over a 5:1 turndown ratio with the maximum flow rate determined at 1″ w.c. pressure drop. With applications in areas with atmospheric low-pressure, these modulating valves consistent gain allows the controller’s entire signal range to be utilized and tuning is simplified. This is a significant improvement over traditional designs. Rather than using a ball, butterfly, and poppet valve, the EXA Star modulating valve has a built-in digital controller that provides a seamless interface with the process controller. This allows the installer to set the high fire and low fire settings and establish mechanical limits for the valve.

At N.H. Yates, we know water. If you are a contractor with interest in the Maxitrol EXA Star Modulating Valves contact one of our water professionals today!

 

 

 

Flex-Hose Tri-Flex Loop

Posted on by Dan Kelbaugh

Flex-Hose Tri-Flex Loop

Flex-Hose Tri-Flex Loop is Available from N.H. Yates

It doesn’t matter what region of the country you live in, your buildings and structures are susceptible to damage from seismic activity. In fact, FEMA has identified mechanical failures of gas and water lines as one of the main causes of fire and damage to property during a seismic event. Fortunately, the Flex-Hose Tri-Flex Loop was created to absorb and compensate for ground movement in six degrees of freedom (three rotation axis, plus rotation along those axes simultaneously). This multi-plane movement design can reduce the need for expansion devices required in piping systems up to 50%. In addition, the Flex-Hose Tri-Flex Loop is the safest and most reliable means of absorbing movement resulting from thermal changes and random seismic shits in a piping system.

Why Choose the Flex-Hose Tri-Flex Loop?

Flex-Hose Tri-Flex Loop

First, Flex-Hose simplified its piping design for an easier installation process. The Tri-Flex Loop does not impose thrust on the piping system. Rather, the pipe’s braid is designed to take the stress of pressurization containing the core, which reduces anchor loads up to 93%. The Tri-Flex Loop also eliminates the need for pipe guides required by traditional pipe designs. Second, the Tri-Flex Loop increases usable space and reduces systems cost. The Flex-Hose system uses 64% less space than mechanical loop systems and eliminates the need for six welds during installation. Additionally, fewer fitting and welds are necessary if the installer positions the Tri-Flex Loop at directional changes and rotates the elbows to make a connection. Third, the Flex-Hose is approved to use in a variety of applications including compressed and combustible gas, steam, hot water, condensed water, and domestic water systems. To accommodate the Tri-Flex Loop is available with flanged ends, steel made NPT ends, weld ends, grooved ends, copper female sweat, or press fit ends.

Flex-Hose Tri-Flex Loop

At N.H. Yates, we know water! For more information about the Flex-Hose Tri-Flex Loop contact one of the knowledgeable water professionals at Yates today!

  • SUPPORT

    800.878.8181

  • Email us

    info@nhyates.com