• 800.878.8181

  • info@nhyates.com

Taco HotLinkPlus-e Instant Hot Water System

taco hotlinkplus-e

Taco HotLinkPlus-e Instant Hot Water System

The innovative Taco HotLinkPlus-e reduces the time it takes hot water comfort to reach your showers and faucets. The HotLinkPlus features a smart water circulator that learns the household hot water usage patterns and makes hot water available at the same time the following week. In addition, if usage patterns change the HotLinkPlus-e system will adjust accordingly. Therefore, if properly installed, the system should never need reprogramming.

How Does The Taco HotLinkPlus-e Work?

The Hot-LinkPlus has three operational modes to fit the needs of any household. First smart mode, monitors, and records the home’s hot water usage pattern. Second, an optional pulse mode sets the circulator to pulses periodically to maintain hot water at all fixtures. Third, in vacation mode, the unit is automatically deactivated when Hot-LinkPlus detects no water use for 36 hours. The circulator turns off and activates for ten seconds every seven days to prevent corrosion and scale buildup. The Hot-LinkPlus bypass valve’s unique thermal disk technology sends cooled water back to the water heater so hot water lines remain hot.

How Much Will The Taco HotLinkPlus-e Save Homeowners?

The HotLinkPlus-e system has the potential to save your customers thousands of gallons of water each year. In fact, it’s estimated the average family wastes up to 12,000 gallons of water per year. That’s energy and resources down the drain! Want to be a hero with your customers? Install a HotLinkPlus-e system in their home!

Installing The Taco HotLinkPlus-e

The Taco HotLinkPlus-e is ideal for new construction projects as well as retrofits in systems without a dedicated hot water return line. In this video, installers can learn everything that they need to know in order to install, calibrate, and test the HotLinkPlus system.

For more information on the Taco HotLinkPlus-e, or any other fine Taco Comfort Solutions products, contact the water professionals at N.H. Yates today.

Burkay Genesis Circulating Water Heater from A.O. Smith

Burkay Genesis Circulating Water Heater

Burkay Genesis Circulating Water Heater from A.O. Smith

The people at A.O. Smith design hot water heaters that highlight the company’s innovative ideas, efficient output, and reliable performance. The Burkay Genesis Circulating Water Heater high-efficiency boilers are no exception. The Burkay Genesis was designed for indoor use installations that require an output over 400,00 BTUs and can accommodate up to 2.07 million BTUs depending on your building’s needs. In addition, the Burkay Genesis Circulating Water Heater features an 84% thermal efficiency which is the absolute highest efficiency possible in a non-condensing water heater. The unit’s Low NOx provides precise amounts of gas and air mixture premixed through special orifices and is forced through stainless steel burners that provide a complete and clean combustion. GW/GWO 1000 through 1850 comply with SCAQMD Rule 1146.2 and other Air Quality Management with similar requirements. GW/GWO 2100 and 2500 comply with SCAQMD Rule 1146.1 when field certified by SCAQMD.

Burkay Genesis Circulating Water Heater

 

Electronic Control with Precise Temperature Management
  • Controls every electrical water heater function, including pump operation and main burner ignition, delivers precise temperature management, with ±1o accuracy
  • Display panel shows the current operating status and fault readings n Display also shows temperature setpoints, outlet temperature, current inlet/outlet differential, and tank temperature
  • Included remote temperature sensor when mounted in the storage tank allows the tank temperature to be set and monitored at the water heater

 

Stage Gas Firing System
  • Prevents short cycling and ensures smooth operation, saves fuel and extends product life
  • Delivers maximum output when demand is high, reduced firing rates during off-peak times.

 

Ultra-Low-NOx Operation
  • Complies with SCAQMD Rule 1146.2 and other Air Quality Management Districts with similar NOx emission requires of 14 ng/J or 20 ppm (GW/GWO 1000-1850 models)

 

Copper Finned-Tube Heat Exchanger
  • Gasketless glass-lined headers and copper-finned tubes with extruded integral fins deliver exceptional heat transfer
  • Copper is lightweight for easier handling and immune to thermal shock

 

Space Saving Design
  • Optional stack rack allows one unit to be stacked on top of another, doubling output within the footprint of a single unit
  • If floor space is limited, the Genesis water heater can be installed outdoors with an optional outdoor Vent Cap.
  • Multiple Venting Options
  • All Genesis models can vent vertically in Category I with double wall “B” vent or horizontally in Category IV with AL29-4C stainless steel vent material.

 

Factory Start-Up Included
  • Required for activating warranty and assuring maximum operating performance. Contact your local sales representative or Authorized Start-Up Agent to arrange a FREE Certified Start-Up.

 

Five-Year Heat Exchanger Limited Warranty 
Meets ASHRAE/IESNA 90.1-2004

At N.H. Yates, we know water. If you are a contractor or engineer that needs more information on the Burkay Genesis Circulating Water Heater from A.O. 
Smith contact a water professional at Yates today.

Ac-U-Temp Packaged Hot Water Supply Systems

Ac-U-Temp Packaged Hot Water Supply SystemsGet A.O. Smith’s Ac-U-Temp Packaged Hot Water Supply Systems from N.H. Yates

A.O. Smith is one of the top manufacturers of high-quality commercial hot water heaters, storage tanks, boilers and, hydronic components in the world. However, A.O. Smith’s Ac-U-Temp Packaged Water Supply Systems combine all of their best automatic circulating water heating components to create a custom, pre-piped and wired, commercial hot water system that meets your business’s specific needs. Once assembled and on-site, the Ac-U-Temps Packaged Systems are easy to install. The installation team simply connects the flue, gas. electric supply, coldwater make-up, and hot water supply and your commercial hot water system is ready to go.

Why choose A.O. Smith’s Ac-U-Temp Packaged Hot Water Supply System?

Ac-U-Temp Packaged Hot Water Supply Systems

Tank Capacities
  • Standard tank sizes from 80 to 1,000 gallons
  • Custom tanks to 10,000 gallons Eliminate Costly Field Errors
  • Factory-engineered and assembled to assure proper pipe, pump, and wire sizing
  • Systems are pre-piped and wired to guarantee maximum system efficiency

 

Simplifies Installation
  • The installer simply connects the flue, gas, electric supply, cold water make-up, and hot water supply

 

Ac-U-Temp Storage Tanks
  • Each tank is specially designed with tank opening locations that provide maximum tank draw efficiency and eliminate any unnecessary piping and connections
  • Standard Ac-U-Tanks are factory jacketed and insulated (Bare tanks are also available)

 

Custom Ac-U-Temp Systems
  • All systems are built to order to meet your specifications
  • Many heater and tank combinations available

 

Multi-Tank Systems
  • For applications with low ceiling heights or unique installation challenges

 

Electric Back-Up
  • Heavy-duty electric elements and controls can be specified for up to 3,000 kW for 100% electric back-up
  • Provides hot water even during natural gas curtailments

 

Superior I-Beam Skid
  • For easy shipping
  • Larger systems may be shipped on a split skid that is easily assembled during installation

 

Factory Hydrostatic And Fire-Tested Before Shipping
5-Year Heat Exchanger Module And 5-Year Limited Tank Warranty

Ac-U-Temp Packaged Hot Water Supply Systems

At N.H. Yates, we know water. If you are a contractor or engineer interested in more information on A.O. Smith’s Ac-U-Temp Packaged Hot Water Supply Systems contact a water professional at Yates today!